It could save you... More than you think...


Introduction m2 AAD

m2 multi AAD

The m2 multi is an electronic automatic activation device, operating on the principle of pressure reading. The primary means for detecting the altitudeand fall rate is a pressure sensor. The altitude is calculated based on the difference between two atmospheric pressures. The pressure at current altitude andpressure on landing location “GROUND ZERO”. The pressure on the landing location is measured and set after switching on the device during calibration.This pressure is automatically adjusted by a change in barometric pressure during the day without the need for user intervention. The m2 multi checksthe ambient barometric pressure every 32 seconds and it determines whether the aircraft has taken off. If yes, it begins to monitor the skydiver’s altitudeand fall rate. The pressure sensor measures the atmospheric pressure 8x per second in free fall.The information collected is evaluated by means of a microprocessor and ingenious software and it is converted to real fall rate and altitude. Thanks to this,the m2 multi device is capable of meeting the preset criteria of fall rate in combination with altitude above the landing location, cut the reserve parachuteclosing loop by means of the cutter and thus initiate the deployment sequence. The device is activated only in the case the preset criteria are met; the criteria differ depending on the set profiles - STUDENT (Stu), INTERMEDIATE (Int), PROFESSIONAL (Pro), CANOPY PILOTING (Cpi) and TANDEM (Tan)

Main benefits

  • Total service life approx. 15 years + 6 months or 5 000 flight hours or 15 000 jumps (20 minutes per jump);
  • No battery maintenance;
  • 5 profiles in one device - one device for all types of skydiving!;
  • Excelent small and flat cutter;
  • New function AdJUSt (Increase the activation altitude!);
  • Many other functions;
  • Pleasant price (Ask you dealer);

m2 AAD

The automatic activation device m2 provides automatic cutting of the closing loop of the reserve parachute in cases where safety of the parachutist is in danger. It is constructed and produced on the basis of latest research focused on parachuting. Its function fully complies with the requirements of current parachuting. Professional design engineers participated in the development and they are also excellent parachutists.

The m2 is available in versions EXPERT, STUDENT or TANDEM. Upon activation, m2 operates fully automatically. The metal parts are made from stainless steel or aluminium alloy. The main features of m2 are solid structure, flexible cablet, submersion under water during swooping, batery time life 15 years or up to 15,000 jumps, simple operation, acceptable price, and quality service.

The m2 stores the flight record during active use. The device is on sale from June 2011. During this time it was done thousands of jumps with m2. Now there are three known activation m2 unit followed by a reserve parachute opening.
 

PRICE LIST (without V.A.T. and transport)
Item EUR (€) USD ($)
m2 STUDENT AAD ask your dealer ask your dealer
m2 EXPERT AAD ask your dealer ask your dealer
m2 TANDEM AAD ask your dealer ask your dealer
Cutter m2 128.00 180.00
SW (Version) change 32.00 46.00

Search dealers

RSSRSS

News

11. 08. 2017

m2 multi AAD

20. 12. 2016

PF 2017

Why m2 AAD

  • 15 years or 15 000 jumps without maitenance 
  • cost-effective
  • waterproof up to 2m
  • simple operation
  • Technical Support 

© 2017 MarS a.s. – All Rights Reserved

Term of Use | Private policy | Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing

to top ↑